Sonnax Smart-Tech Input Housing Kit Heavy-Duty Updated GM 4L60E/65/70 77733-06KA

Description

Limitations of the GM 4L60 series OE input housing are the root cause of 3-4 burnup in performance applications. The weak OE backing plate’s limited space. Stop the failure.
Sonnax Smart-Tech input housing kit 77733-06KA makes room for a taller clutch pack anchored in place by a stronger backing plate — the most reliable way to increase clutch capacity and protect against destructive heat.
To avoid the problems found with older, OE housing designs, Sonnax starts with the latest production, new housings from GM. These improved housings have splines for the input shaft that are cut at minimum spec for reliable shaft retention and sealing. The housings also benefit from added material for a thicker, more consistent cross-section that protects against breakage.
Combined with other Sonnax improvements, the Smart-Tech input housing guarantees the ultimate combination of durability and protection against failure in high horsepower, higher pressure applications. The housing also is available with a pre-installed, Sonnax heavy-duty input shaft.
Physically larger clutch pack area for increased 3-4 clutch capacity without sacrificing clutch durability. Use your choice of:
Eight .067" frictions with seven .095" steels
Nine .062" frictions with eight .077" steels
Anchored backing plate keeps clutches parallel to stop the flexing and distortion that leads to heat build-up
100% New housing optimizes input shaft fitment and is further upgraded for significantly more resistant to fatigue failure
Steel reinforcement sleeve prevents breakage in the spline area
Custom backing plate replaces OE retaining ring to eliminate risk of blowout
Note
Requires '91-later 3-4 apply ring; requires '97-later ring gear; requires '97-later dual-cage return spring; requires '87-later forward backing plate; requires '97-later stamped steel forward piston. Cannot be used with aluminum forward piston or Sonnax billet forward piston
77764-01
. See instructions for further detail.
Contents
Modified Input Housing
Bolt-on Anchor Plate
3-4 Clutch Apply Plate
3-4 Clutch Return Springs (10)
Input Drum Reinforcement Sleeve
Overrun Piston
Overrun Piston Inner Seal
Overrun Piston Outer Seal
PTFE Impregnated Rear Stator Support Bushing
Socket Head Cap Screws (15)
Note:
Not all sellers are the same, checkout feedback score. When buying from Trans Parts Now you also get great tech support from a transmission rebuilder/tech adviser. Also don't always shop price because the quality is not always the same.
About Us:
We have been in the transmission industry for over 20 plus years. I'm proud to say I'm a 2nd generation transmission rebuilder and transmission tech. I do not sell any product that I would not use on my own rebuilds. We take pride in
customer
service and
quality
parts with free shipping. If you have any questions please ask us, we are qualified to help you with your transmission
problems
.
Warranty
:
We stand behind all of our products we sell. If we can't warranty it we don't sell it. Most of our product have a 1 year warranty but check the listing or ask us. AND most important if you EVER have a problem with our parts please contact us. We are here to help and we stand behind all of our quality products. We will resolve ANY warranty issues.
Customer
Satisfaction
:
Our main goal is 100% customer
satisfaction
and 100%
feedback
score. Please check out our feedback. IF for any reason you are unhappy with your purchase, please allow us the opportunity to correct any issues before leaving EBay a neutral or negative feedback.  We appreciate your business.